Backplane on LA channel

December 21, 2020

Contributed by:

C S

In this deployment, LA channels are used for the cluster backplane.

Cluster two arms

NS0 - nodeId: 0, NSIP: 10.102.29.60
NS1 - nodeId: 1, NSIP: 10.102.29.70
NS2 - nodeId: 2, NSIP: 10.102.29.80

To deploy a cluster with the backplane interfaces as LA channels

Create a cluster of nodes NS0, NS1, and NS2.
1. Log on to the first node that you want to add to the cluster and do the following:
```
> create cluster instance 1
> add cluster node 0 10.102.29.60 -state ACTIVE
> enable cluster instance 1
> add ns ip 10.102.29.61 255.255.255.255 -type CLIP
> save ns config
> reboot -warm
```
2. Log on to the cluster IP address and do the following:
```
> add cluster node 1 10.102.29.70 -state ACTIVE
> add cluster node 2 10.102.29.80 -state ACTIVE
```
3. Log on to the nodes 10.102.29.70 and 10.102.29.80 to join the nodes to the cluster.
```
> join cluster -clip 10.102.29.61 -password nsroot
> save ns config
> reboot -warm
```
As seen in the preceding commands, the interfaces 0/1/1, 1/1/1, and 2/1/1 are configured as the backplane interfaces of the three cluster nodes.

Log on to the cluster IP address and do the following:

Create the LA channels for nodes NS0 and NS1.

> add channel 0/LA/1 -ifnum 0/1/1 0/1/2
> add channel 1/LA/2 -ifnum 1/1/1 1/1/2

Configure the backplane for the cluster nodes.

> set cluster node 0 -backplane 0/LA/1
> set cluster node 1 -backplane 1/LA/2
> set cluster node 2 -backplane 2/1/1

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

Backplane on LA channel

December 21, 2020

Contributed by:

C S

December 21, 2020

Contributed by:

C S

Backplane on LA channel

To deploy a cluster with the backplane interfaces as LA channels

In this article