ADC

Configure an authoritative DNS service

May 2, 2023

Contributed by:

When you configure the NetScaler appliance as an authoritative DNS server, it accepts DNS requests from the client and responds with the IP address of the data center to which the client should send requests.

Note: For the NetScaler appliance to be authoritative, you must also create SOA and NS records. For more information about SOA and NS records, see Domain Name System.

To create an ADNS service by using the command line interface

At the command prompt, type the following commands to create an ADNS service and verify the configuration:

add service <name> <IP>@ ADNS <port>

show service <name>
<!--NeedCopy-->

Example:

add service Service-ADNS-1 10.14.39.21 ADNS 53

show service Service-ADNS-1
<!--NeedCopy-->

To modify an ADNS service by using the command line interface

At the command prompt, type the following command:

set service <name> <IPAddress> ADNS <port>
<!--NeedCopy-->

Example:

set service Service-ADNS-1 10.14.39.21 ADNS 53
<!--NeedCopy-->

To remove an ADNS service by using the command line interface

At the command prompt, type the following command:

rm service <name>
<!--NeedCopy-->

Example:

rm service Service-ADNS-1
<!--NeedCopy-->

To configure an ADNS service by using the configuration utility

Navigate to Traffic Management > Load Balancing > Services.
Add a new ADNS service, or select an existing service and edit its settings.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

Configure an authoritative DNS service

May 2, 2023

Contributed by:

May 2, 2023

Contributed by:

Configure an authoritative DNS service

To create an ADNS service by using the command line interface

To modify an ADNS service by using the command line interface

To remove an ADNS service by using the command line interface

To configure an ADNS service by using the configuration utility

In this article