Product Documentation
ADC
14.1 - Current Release 13.1 13.0 12.1
View PDF

Configuring DS-Lite Static Maps

September 14, 2021
Contributed by: 
S

The Citrix ADC appliance supports manual creation of DS-Lite LSN mappings, which contain the mapping between the following information:

  • Subscriber’s IP address and port, and IPv6 address of B4 device or component

  • NAT IP address and port

Static DS-Lite LSN mappings are useful in cases where you want to ensure that the connections initiated to a NAT IP address and port map to the subscriber IP address and port through the specified B4 device (for example, web servers located in the internal network).

Note: This feature is supported in release 11.0 build 64.x and later.

To create a DS-Lite static LSN mapping by using the command line

At the command prompt, type:

add lsn static <name> <transportprotocol> <subscrIP> <subscrPort> [-td <positive_integer>] [-network6 <B4_ADDR>] [<natIP> [<natPort>]] [-destIP<ip_addr> [-dsttd <positive_integer>]]

show lsn static
<!--NeedCopy-->

Parameter Descriptions

add lsn static

  • name

Name for the LSN static mapping entry. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the LSN group is created. The following requirement applies only to the CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, “ds-lite lsn static1” or ‘ds-lite lsn static1’). This is a mandatory argument. Maximum Length: 127

  • transportprotocol

Protocol for the DS-Lite LSN mapping entry.

  • subscrIP

IPv4 address of a subscriber for the DS-Lite LSN mapping entry.

  • subscrPort

Port of the subscriber for the DS-Lite LSN mapping entry.

  • Network6

IPv6 address of the B4 device or component.

  • td

ID of the traffic domain to which the B4 device belongs. The IPv6 address of the B4 device is specified in the network6 paramter. If you do not specify an ID, the B4 device is assumed to be a part of the default traffic domain.

  • natIP

IPv4 address, already existing on the Citrix ADC appliance as type LSN, to be used as NAT IP address for this mapping entry.

  • natPort

NAT port for this DS-Lite LSN mapping entry.

  • destIP

Destination IP address for the DS-Lite LSN mapping entry.

  • dsttd

ID of the traffic domain through which the destination IP address for this DS-Lite LSN mapping entry is reachable from the Citrix ADC appliance. If you do not specify an ID, the destination IP address is assumed to be reachable through the default traffic domain, which has an ID of 0.

To create a DS-Lite static LSN mapping by using the configuration utility

Navigate to System > Large Scale NAT > Static, and add a new DS-Lite static LSN mapping.

Configuring DS-Lite Static Maps
September 14, 2021
Contributed by: 
S
September 14, 2021
Contributed by: 
S

In this article

Site feedback | Your privacy choices footer linkYour Privacy Choices | Privacy and legal terms | Cookie preferences | Consent settings | docs.cloud.com
© 1999- Cloud Software Group, Inc. All rights reserved.