ADC

Overriding LSN configuration with Load Balancing Configuration

September 14, 2021

Contributed by:

S C

An LSN configuration takes precedence over any load balancing configuration by default. For overriding the large scale networking (LSN) configuration with the load balancing configuration for traffic matching both configurations, create a net profile with Override LSN parameter enabled and bind this profile to the virtual server of the load balancing configuration. USNIP or USIP settings of the load balancing configuration are applied to the traffic, instead of applying the LSN IP address of the LSN configuration.

This option is useful in an LSN deployment that includes Citrix ADC appliances and value added services, such as firewall and optimization devices. In this type of deployment, the ingress traffic on the Citrix ADC appliance is required to pass through these value-added services before an LSN configuration on the appliance is applied to the traffic. For the Citrix ADC appliance to send the ingress traffic to a value added service, a load balancing configuration is created and override LSN is enabled on the appliance. The load balancing configuration includes value added services, represented as load balancing services, bound to a virtual server of type ANY. The virtual server is configured with listen policies for identifying the traffic to be sent to the value added service.

To enable override lsn in a net profile by using the CLI

To enable override lsn while adding a net profile, at the command prompt, type

add netProfile <name> -overrideLsn ( ENABLED | DISABLED )

show netprofile <name>
<!--NeedCopy-->

To enable override lsn while adding a net profile, at the command prompt, type

set netProfile <name> -overrideLsn ( ENABLED | DISABLED )

show netprofile <name>
<!--NeedCopy-->

To enable override lsn in a net profile by using GUI

Navigate to System > Network > Net Profiles.
Set the Override LSN parameter while adding or modifying net profiles.

In the following sample configuration, net profile NETPROFILE-OVERRIDELSN-1 has override LSN option enabled and is bound to load balancing virtual server LBVS-1.

Sample configuration:

add netprofile NETPROFILE-OVERRIDELSN-1 -overrideLsn ENABLED

Done

set lb vserver LBVS-1 -netprofile NETPROFILE-OVERRIDELSN-1

Done
<!--NeedCopy-->

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Overriding LSN configuration with Load Balancing Configuration

September 14, 2021

Contributed by:

S C

September 14, 2021

Contributed by:

S C

Overriding LSN configuration with Load Balancing Configuration

To enable override lsn in a net profile by using the CLI

To enable override lsn while adding a net profile, at the command prompt, type

To enable override lsn while adding a net profile, at the command prompt, type

To enable override lsn in a net profile by using GUI

In this article