ADC

Create PTR records for IPv4 and IPv6 addresses

September 14, 2021

Contributed by:

S C

A pointer (PTR) record translates an IP address to its domain name. IPv4 PTR records are represented by the octets of an IP address in reverse order with the string “in-addr.arpa.” appended at the end. For example, the PTR record for the IP address 1.2.3.4 is 4.3.2.1.in-addr.arpa.

IPv6 addresses are reverse mapped under the domain IP6.ARPA. IPv6 reverse-maps use a sequence of nibbles separated by dots with the suffix “.IP6.ARPA” as defined in RFC 3596. For example, the reverse lookup domain name corresponding to the address, 4321:0:1:2:3:4:567:89ab would be b.a.9.8.7.6.5.0.4.0.0.0.3.0.0.0.2.0.0.0.1.0.0.0.0.0.0.0.1.2.3.4.IP6.ARPA.

Add a PTR record by using the CLI

At the command prompt, type the following commands to add a PTR record and verify the configuration:

-  add dns ptrRec <reverseDomain> <domain> [-TTL <secs>]
-  show dns ptrRec <reverseDomain>
<!--NeedCopy-->

Example:

> add dns ptrRec 0.2.0.192.in-addr.arpa example.com
 Done
> show dns ptrRec 0.2.0.192.in-addr.arpa
1)      Reverse Domain Name : 0.2.0.192.in-addr.arpa
        Domain Name : example.com               TTL : 3600 secs
 Done
<!--NeedCopy-->

To remove a PTR record, type the rm dns ptrRec command and the reverse domain name associated with the PTR record

Add a PTR record by using the GUI

Navigate to Traffic Management > DNS > Records > PTR Records and create a PTR record.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Create PTR records for IPv4 and IPv6 addresses

September 14, 2021

Contributed by:

S C

September 14, 2021

Contributed by:

S C

Create PTR records for IPv4 and IPv6 addresses

Add a PTR record by using the CLI

Add a PTR record by using the GUI

In this article