-
-
-
Route Health Injection Based on Virtual Server Settings
-
Traffic distribution in multiple routes based on five tuples information
-
Configure to source Citrix ADC FreeBSD data traffic from a SNIP address
This content has been machine translated dynamically.
Dieser Inhalt ist eine maschinelle Übersetzung, die dynamisch erstellt wurde. (Haftungsausschluss)
Cet article a été traduit automatiquement de manière dynamique. (Clause de non responsabilité)
Este artículo lo ha traducido una máquina de forma dinámica. (Aviso legal)
此内容已经过机器动态翻译。 放弃
このコンテンツは動的に機械翻訳されています。免責事項
이 콘텐츠는 동적으로 기계 번역되었습니다. 책임 부인
Este texto foi traduzido automaticamente. (Aviso legal)
Questo contenuto è stato tradotto dinamicamente con traduzione automatica.(Esclusione di responsabilità))
This article has been machine translated.
Dieser Artikel wurde maschinell übersetzt. (Haftungsausschluss)
Ce article a été traduit automatiquement. (Clause de non responsabilité)
Este artículo ha sido traducido automáticamente. (Aviso legal)
この記事は機械翻訳されています.免責事項
이 기사는 기계 번역되었습니다.책임 부인
Este artigo foi traduzido automaticamente.(Aviso legal)
这篇文章已经过机器翻译.放弃
Questo articolo è stato tradotto automaticamente.(Esclusione di responsabilità))
Translation failed!
Route Health Injection Based on Virtual Server Settings
The following option and parameter are introduced for controlling the Route Health Injection (RHI) functionality of the Citrix ADC appliance for advertising the route of a VIP address.
- VSVR_CNTRLD. It is an option for the (Vserver RHI Level) parameter of a VIP address. When this option is set to the Vserver RHI Level parameter, the RHI behavior for advertising the route of the VIP address depends on the RHI STATE parameter setting on all the associated virtual servers of the VIP address along with their states.
- RHI STATE. It is a parameter of virtual server. You can set the RHI STATE parameter to either PASSIVE or ACTIVE. By default, the RHI STATE parameter is set to PASSIVE.
For a VIP address, when RHI (Vserver RHI Level) parameter is set to VSVR_CNTRLD, the following are different RHI behaviours for the VIP address on the basis of RHI STATE settings on the virtual servers associated with the VIP address:
- If you set RHI STATE to PASSIVE on all virtual servers, the Citrix ADC always advertises the route for the VIP address.
- If you set RHI STATE to ACTIVE on all virtual servers, the Citrix ADC advertises the route for the VIP address if at least one of the associated virtual servers is in UP state.
- If you set RHI STATE to ACTIVE on some and PASSIVE on others, the Citrix ADC advertises the route for the VIP address if at least one of the associated virtual servers, whose RHI STATE set to ACTIVE, is in UP state.
Following table displays the sample RHI behaviour for a VIP address on the basis of RHI STATE settings on the virtual servers associated with the VIP address. The Citrix ADC appliance has two virtual servers V1 and V2 associated with the VIP address:
| Associated virtual servers for a VIP | State 1 | State 2 | State 3 | State 4 |
|---|---|---|---|---|
| RHI State set to PASSIVE on all virtual servers | ||||
| V1 | UP | UP | DOWN | DOWN |
| V2 | UP | DOWN | UP | DOWN |
| Advertise the route for this VIP address? | Yes | Yes | Yes | Yes |
| RHI State set to ACTIVE on all virtual servers | ||||
| V1 | UP | UP | DOWN | DOWN |
| V2 | UP | DOWN | UP | DOWN |
| Advertise the route for this VIP address? | Yes | Yes | Yes | No |
| RHI State set to ACTIVE on one virtual server and PASSIVE on the other | ||||
| V1 (RHI State = ACTIVE) | UP | UP | DOWN | DOWN |
| V2 (RHI State = PASSIVE) | UP | DOWN | UP | DOWN |
| Advertise the route for this VIP address? | Yes | Yes | No | No |
To configure RHI for a VIP address, to be based on the RHI (RHI State) parameter setting of the associated virtual servers, perform the following steps:
- Set the RHI (Vserver RHI Level) parameter to VSVR_CNTRLD for the VIP address.
- Set the RHI State parameter for each virtual server associated with the VIP address.
To set the vServer RHI Level for a VIP address by using the CLI:
At the command prompt, type:
- set ns ip <IPAddress> [-vserverRHILevel <vserverRHILevel>]
To set the RHI State parameter of a virtual server by using the CLI:
At the command prompt, type:
- **set lb vserver** <name> [-**RHIstate** ( **PASSIVE** | **ACTIVE** )]
To set the vServer RHI Level for a VIP address by using GUI
- Navigate to System > Network > IPs.
- Select a VIP address, and then click Edit.
- Set the Vserver RHI Level parameter to VSVR_CNTRLD, and then click OK.
To set the RHI State parameter of a virtual server by using GUI
- Navigate to Traffic Management > Load Balancing > Virtual Servers.
- Select a load balancing virtual server, and then click Edit.
- Set the RHI State parameter, and then click OK.
Share
Share
In this article
This Preview product documentation is Cloud Software Group Confidential.
You agree to hold this documentation confidential pursuant to the terms of your Cloud Software Group Beta/Tech Preview Agreement.
The development, release and timing of any features or functionality described in the Preview documentation remains at our sole discretion and are subject to change without notice or consultation.
The documentation is for informational purposes only and is not a commitment, promise or legal obligation to deliver any material, code or functionality and should not be relied upon in making Cloud Software Group product purchase decisions.
If you do not agree, select I DO NOT AGREE to exit.