ADC

Installing the Citrix ADC web logging (NSWL) client

September 14, 2021

Contributed by:

S S C

When you install NSWL, the client executable file (NSWL) is installed along with other files. The NSWL executable file provides a list of options that you can use. For details, see Configuring the NSWL Client.

Attention

The version of the NSWL client must be the same as Citrix ADC. For example, if the version of the Citrix ADC is 10.1 Build 125.9, the NSWL client must also be of the same version. Also, the web logging (NSWL) client works on both 32 bit and on 64 bit server machines. The download page has only a 32 bit weblog client. The 64 bit weblog client is available on request, and recommends you to contact Citrix support for more information.

The following table lists the operating systems on which the NSWL client can be installed.

Operating system	Version	Hardware requirements	Remarks
Windows	Windows Server 2016 or later	Processor - x86/amd64 CPU (1 GHz or higher), RAM - 4 GB (or higher)
macOS	macOS 8.6 or later	Not supported on Citrix ADC 10.1 and later releases.
Linux	Ubuntu, SUSE Linux, CentOS, Red Hat Enterprise Linux released in 2016 or later	Processor - x86/amd64 CPU (1 GHz or higher), RAM - 4 GB (or higher)
Solaris	Solaris Sun OS 5.6 or later	Processor - UltraSPARC-IIi 400 MHz, RAM - 512 MB, Controller - SCSI	Not supported on Citrix ADC 10.5 and later releases.
FreeBSD	FreeBSD 6.3 or later	Processor - x86/amd64 CPU (1 GHz or higher), RAM - 4 GB (or higher)	For Citrix ADC 10.5, use only FreeBSD 8.4.
AIX	AIX 6.1	-	Not supported on Citrix ADC 10.5 and later releases.

If the NSWL client system cannot process the log transaction because of a CPU limitation, the Web log buffer overruns and the logging process reinitiates.

Caution

Reinitiation of logging can result in loss of log transactions.

To temporarily solve an NSWL client system bottleneck caused by a CPU limitation, you can tune the Web server logging buffer size on the Citrix ADC appliance. To solve the problem, you need a client system that can handle the site’s throughput.

Download NSWL client

You can obtain the NSWL client package from either the Citrix ADC product CD or the Citrix downloads site. Within the package there are separate installation packages for each supported platform.

To download the NSWL client from the Citrix website

Log on to Citrix by accessing the URL https://www.citrix.com/downloads/citrix-adc/.
Navigate to a particular Citrix ADC release version and look for its Firmware.
Click Firmware (for example, Citrix ADC Release (Feature Phase) 13.0 Build 52.24).
In the Citrix ADC Release (Feature Phase) Build page, go to Weblog Clients section.
The section allows you to download Weblog clients for Windows, Linux, and BSD.

Install NSWL client on Solaris

To install the NSWL client, perform the following operations on the system where you downloaded the package.

Extract the nswl_solaris-<release number>-<build number>.tar file from the package.
Copy the extracted file to a Solaris system on which you want to install the NSWL client.
Extract the files from the tar file with the following command:

tar xvf nswl_solaris-9.3-51.5.tar

A directory Weblog is created in the temporary directory, and the files are extracted to the Weblog directory.

Install the package with the following command:

pkgadd -d
The list of available packages appears. In the following example, one Weblog package is shown:

1 NSweblog Citrix ADC Weblogging (SunOS,sparc) 7.0

You are prompted to select the packages. Select the package number of the Weblog to be installed.

After you select the package number and press Enter, the files are extracted and installed in the following directories:

/usr/local/netscaler/etc
/usr/local/netscaler/bin
/usr/local/netscaler/samples

To check whether the NSWL package is installed, run the following command:

pkginfo | grep NSweblog
To uninstall the NSWL package, run the following command:

pkgrm NSweblog

Install NSWL client on Linux

Important

The installation of an NSWL client on Linux replaces the configuration file. You must take a backup before installing it.

To install the NSWL client, perform the following operations on the system where you downloaded the package.

Extract the nswl_linux-<release number>-<build number>.rpm file from the package.
Copy the extracted file to a system, running Linux OS, on which you want to install the NSWL client.
To install the NSWL package, run the following command:

rpm -i nswl_linux-9.3-51.5.rpm

This command extracts the files and installs them in the following directories.

/usr/local/netscaler/etc
/usr/local/netscaler/bin
/usr/local/netscaler/samples

To uninstall the NSWL package, run the following command:

rpm -e NSweblog
To get more information about the Weblog RPM file, run the following command:

rpm -qpi *.rpm
To view the installed Web server logging files, run the following command:

rpm -qpl *.rpm

Install NSWL client on FreeBSD

To install the NSWL client, perform the following operations on the system where you downloaded the package.

Extract the nswl_bsd-<release number>-<build number>.tgz file from the package.
Copy the extracted file to a system, running FreeBSD OS, on which you want to install the NSWL client.
To install the NSWL package, run the following command:

pkg_add nswl_bsd-9.3-51.5.tgz

This command extracts the files and installs them in the following directories.

-  /usr/local/netscaler/etc
-  /usr/local/netscaler/bin
-  /usr/local/netscaler/samples

To uninstall the NSWL package, run the following command:

pkg_delete NSweblog
To verify that the package is installed, run the following command:

pkg_info | grep NSweblog

Install the NSWL client on Mac

To install the NSWL client, perform the following operations on the system where you downloaded the package.

Extract the nswl_macos-<release number>-<build number>.tgz file from the package.
Copy the extracted file to a system, running macOS, on which you want to install the NSWL client.
To install the NSWL package, run the following command:

pkg_add nswl_macos-9.3-51.5.tgz

This command extracts the files and installs them in the following directories:

/usr/local/netscaler/etc
/usr/local/netscaler/bin
/usr/local/netscaler/samples

To uninstall the NSWL package, run the following command:

pkg_delete NSweblog
To verify that the package is installed, run the following command:

pkg_info | grep NSweblog

Install NSWL client on Windows

To install the NSWL client, perform the following operations on the system where you downloaded the package.

Extract the nswl_win-<release number>-<build number>.zip file from the package.
Copy the extracted file to a Windows system on which you want to install the NSWL client.
On the Windows system, unzip the file in a directory (referred as <NSWL-HOME>). The following directories are extracted: /bin, and /etc and /samples.
At the command prompt, run the following command from the <NSWL-HOME>\bin directory:

nswl -install -f <directorypath>\log.conf

Where,

Directory path refers to the path of the configuration file (log.conf). By default, the file is in the <NSWL-HOME> and /etc directory. You can copy the configuration file to any other directory.

Note

To uninstall the NSWL client, at the command prompt, run the following command from the <NSWL-HOME>\bin directory:

> nswl -remove

Install NSWL client on AIX system

To install the NSWL client, perform the following operations on the system where you downloaded the package.

Extract the nswl_aix-<release number>-<build number>.rpm file from the package.
Copy the extracted file to a system, running AIX OS, on which you want to install the NSWL client.
To install the NSWL package, run the following command:

rpm -i nswl_aix-9.3-51.5.rpm

This command extracts the files and installs them in the following directories.

/usr/local/netscaler/etc
/usr/local/netscaler/
usr/local/netscaler/samples

To uninstall the NSWL package, run the following command:

rpm -e NSweblog
To get more information about the Weblog RPM file, run the following command:

rpm -qpi *.rpm
To view the installed Web server logging files, run the following command:

rpm -qpl *.rpm

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Installing the Citrix ADC web logging (NSWL) client

September 14, 2021

Contributed by:

S S C

September 14, 2021

Contributed by:

S S C

Installing the Citrix ADC web logging (NSWL) client

Download NSWL client

To download the NSWL client from the Citrix website

Install NSWL client on Solaris

Install NSWL client on Linux

Install NSWL client on FreeBSD

Install the NSWL client on Mac

Install NSWL client on Windows

Install NSWL client on AIX system

In this article