ADC

New and deprecated commands, parameters, and SNMP OIDs

September 14, 2021

Contributed by:

S C

This section lists the new and deprecated commands, parameters, and SNMP OIDs.

New commands

The following table lists the new commands in release 13.0.

Command group	Command
Authentication, authorization, and auditing	add aaa ssoprofile; rm aaa ssoprofile; show aaa ssoprofile; set aaa ssoprofile; add authentication citrixAuthAction; rm authentication citrixAuthAction; set authentication citrixAuthAction; unset authentication citrixAuthAction; show authentication citrixAuthAction; lock aaa user; set aaa otpparameter; show aaa otpparameter; add authentication emailAction; rm authentication emailAction; set authentication emailAction; show authentication emailAction; add authentication noAuthAction; rm authentication noAuthAction; set authentication noAuthAction; show authentication noAuthAction; add authentication captchaAction; rm authentication captchaAction; set authentication captchaAction; show authentication captchaAction; add authentication adfsProxyProfile; rm authentication adfsProxyProfile; set authentication adfsProxyProfile; show authentication adfsProxyProfile
AppFlow	bind appflow action; unbind appflow action
Application Firewall	stat rnat6 and stat MapBmr
Content Inspection	add contentInspection profile; rm contentInspection profile; set contentInspection profile; show contentInspection profile; add contentInspection callout; rm contentInspection callout; set contentInspection callout; show contentInspection callout; count contentInspection callout; set contentInspection parameter; unset contentInspection parameter; show contentInspection parameter
LSN	add lsn appsattributes; rm lsn appsattributes; set lsn appsattributes; show lsn appsattributes
Network	add rnat; rename rnat; bind rnat; unbind rnat; rm rnat
SSL	add ssl caCertGroup; bind ssl caCertGroup; rm ssl caCertGroup; unbind ssl caCertGroup; show ssl caCertGroup
System	enable system autorestorefeature ; rm system restorepoint; show system restorepoint; migrate ns; show ns timezone; disable system autorestorefeature; create system restorepoint
URL Filtering	add urlfiltering Categorization; clear urlfiltering Categorization; show urlfiltering Categorization
VPN	add vpn urlPolicy; rm vpn urlPolicy; set vpn urlPolicy; show vpn urlPolicy; stat vpn urlPolicy; rename vpn urlPolicy; add vpn urlAction; rm vpn urlAction; set vpn urlAction; show vpn urlAction; rename vpn urlAction

New parameters

Command group: Authentication, authorization, and auditing

Command:

set aaa parameter [-maxKBQuestions]
unset aaa parameter [-maxKBQuestions]
show aaa parameter [-maxKBQuestions]

Command group: Admin Partition

Command:

add ns ip6 [-advertiseOnDefaultPartition]
set ns ip6 [-advertiseOnDefaultPartition]
show ns ip6 [-advertiseOnDefaultPartition]
add ns ip [-advertiseOnDefaultPartition]
set ns ip [-advertiseOnDefaultPartition]
show ns ip [-advertiseOnDefaultPartition]

Command group: AppFlow

Command:

bind appflow action [-analyticsProfile]
unbind appflow action [-analyticsProfile]
show appflow action [-analyticsProfile]
set appflow param [-gxSessionReporting] [-usageRecordInterval] [-metrics] [-events [-auditlogs] [-observationPointId] [-distributedTracing] [-distTracingSamplingRate] [-tcpAttackCounterInterval]
show appflow param [-observationPointId] [-subscriberIdObfuscationAlgo] [-gxSessionReporting] [-usageRecordInterval] [-metrics] [-events] [-auditlogs [-distributedTracing] [-distTracingSamplingRate] [-tcpAttackCounterInterval]

Command group: Application Firewall

Command:

add appfw profile [-postBodyLimitSignature]
add appfw profile [-rfcprofile]
set appfw profile [-postBodyLimitSignature] [-rfcprofile]
show appfw profile [-postBodyLimitSignature] [-rfcprofile]
set appfw settings [-malformedReqAction]
show appfw settings [-malformedReqAction]
import appfw signatures [-preservedefactions]

Command group: Audit

Command:

add audit syslogAction [-ContentInspectionLog]
set audit syslogAction [-ContentInspectionLog]
unset audit syslogAction [-ContentInspectionLog]
show audit syslogAction [-ContentInspectionLog]
add audit nslogAction [-ContentInspectionLog]
set audit nslogAction [-ContentInspectionLog]
unset audit nslogAction [-ContentInspectionLog]
show audit nslogAction [-ContentInspectionLog]
set audit syslogParams [-ContentInspectionLog]
unset audit syslogParams [-ContentInspectionLog]
show audit syslogParams [-ContentInspectionLog]
set audit nslogParams [-ContentInspectionLog]
unset audit nslogParams [-ContentInspectionLog]
show audit nslogParams [-ContentInspectionLog]

Command group: Authentication

Command:

add authentication ldapAction [-KBAttribute] [-alternateEmailAttr]
set authentication ldapAction [-KBAttribute] [-alternateEmailAttr]
show authentication ldapAction [-KBAttribute] [-alternateEmailAttr]
add authentication tacacsAction [-Attributes]
set authentication tacacsAction [-Attributes]
show authentication tacacsAction [-Attributes]
add authentication samlAction [-Attributes] [-storeSAMLResponse]
set authentication samlAction [-Attributes] [-storeSAMLResponse]
show authentication samlAction [-Attributes] [-storeSAMLResponse]
add authentication vserver [-certkeyNames]
set authentication vserver [-certkeyNames]
show authentication vserver [-certkeyNames]- show authentication loginSchema [-feature]- - add authentication OAuthIDPProfile [-configservice] [-signatureAlg] [-Attributes][-sendPassword]
set authentication OAuthIDPProfile [-configservice] [-signatureAlg] [-Attributes] [-sendPassword]
show authentication OAuthIDPProfile [-configservice] [-signatureAlg] [-Attributes] [-sendPassword]
add authentication pushService [-CertEndpoint] [-signingKeyName] [-signingKey] [-clientID] [-clientSecret] [-CustomerID] [-refreshInterval] [-trustService]
set authentication pushService [-CertEndpoint] [-signingKeyName] [-signingKey] [-clientID] [-clientSecret] [-CustomerID] [-refreshInterval] [-trustService]
show authentication pushService [-clientID] [-clientSecret] [-CustomerID] [-CertEndpoint] [-refreshInterval] [-pushServiceStatus] [-trustService] [-pushCloudServerStatus] [-signingKeyName] [-signingKey]
show authentication adfsProxyProfile [-adfsTrustStatus]

Command group: Basic

Command:

add server [-queryType]
show server [-queryType] [-serviceGroupEntName2] [-svcitmPriority] [-svcitmActSvcs] [-svcitmBoundSvcs] [-weight]
add service [-contentInspectionProfileName]
set service[-contentInspectionProfileName]
unset service [-contentInspectionProfileName]- show service [-contentInspectionProfileName]- bind serviceGroup [-nameServer] [-dbsTTL]
show serviceGroup [-numOfCurConnections] [-numOfLastConnections] [-nameServer] [-dbsTTL] [-svcitmActSvcs] [-svcitmPriority] [-svcitmBoundSvcs]

Command group: Cache Redirection

Command:

add cr vserver [-UseOriginIpPortForCache]
set cr vserver [-UseOriginIpPortForCache]
show cr vserver [-UseOriginIpPortForCache]

Command group: Clustering

Command:

show cluster instance [-heterogeneousFlag]

Command group: Content Switching

Command:

add cs vserver [-persistenceType] [-persistMask] [-v6persistmasklen] [-timeout] [-cookieName] [-persistenceBackup] [-backupPersistenceTimeout]
set cs vserver [-persistenceType] [-persistMask] [-v6persistmasklen] [-timeout] [-cookieName] [-persistenceBackup] [-backupPersistenceTimeout]
show cs vserver [-persistenceType] [-persistMask] [-v6persistmasklen] [-timeout] [-cookieName] [-persistenceBackup] [-backupPersistenceTimeout]

Command group: DNS

Command:

set dns nameServer [-type]
rm dns nameServer [-type]
enable dns nameServer [-type]
disable dns nameServer [-type]
show dns action64
set dns parameter [-maxUDPPacketSize]
show dns parameter [-maxUDPPacketSize]

Command group: GSLB

Command:

show gslb service [-gslbsvcHealth] [-glsbsvcHealthdescr]
show gslb parameter [-builtin]

Command group: High Availability

Command:

show HA node [-haSyncFailureReason]

Command group: ICA

Command:

set ica parameter [-HDXInsightNonNSAP]
show ica parameter [-HDXInsightNonNSAP]

Command group: Load Balancing

Command:

add lb vserver [-adfsProxyProfile]
set lb vserver [-adfsProxyProfile]
unset lb vserver [-adfsProxyProfile]
show lb vserver [-adfsProxyProfile]
set lb parameter [-dbsTTL]
show lb parameter [-dbsTTL]

Command group: LSN

Command:

add lsn logprofile [-analyticsProfile] [-logSessDeletion]
set lsn logprofile [-analyticsProfile] [-logSessDeletion]
show lsn logprofile [-analyticsProfile] [-logSessDeletion]
bind lsn appsprofile [-appsattributesname]
unbind lsn appsprofile [-appsattributesname]
show lsn appsprofile [-appsattributesname]

Command group: Network

Command:

add route [-vlan]
rm route [-vlan]
add netProfile [-proxyProtocol] [-proxyProtocoltxversion]
set netProfile [-proxyProtocol] [-proxyProtocoltxversion]
show netProfile [-proxyProtocol] [-proxyProtocoltxversion]
set rnat [-name]
unset rnat [-name]
add rnat [-name]
rename rnat [-name] [-newName]
bind rnat [-name] [-natIP]
unbind rnat [-name] [-natIP]
rm rnat [-name]
show rnat [-name] [-stateflag]

Command group: Policy

Command:

show policy expression
show policy patset
show policy urlset [-imported]
import policy urlset [-subdomainExactMatch]

Command group: RDP

Command:

add rdp clientprofile [-randomizeRDPFilename] [-rdpLinkAttribute]
set rdp clientprofile [-randomizeRDPFilename] [-rdpLinkAttribute]
show rdp clientprofile [-randomizeRDPFilename] [-rdpLinkAttribute]
add rdp serverprofile [-rdpRedirection]
set rdp serverprofile [-rdpRedirection]
show rdp serverprofile [-rdpRedirection]

Command group: SSL

Command:

create ssl ecdsaKey [-pkcs8]
ssl certKey [-deletefromdevice]
clear ssl certKey [-ocspstaplingCache]
add ssl action [-caCertGrpName]
show ssl action [-clientCertVerification] [-caCertGrpName]
show ssl ocspResponder [-port]
create ssl rsakey [-pkcs8]
set ssl parameter [-ndcppComplianceCertCheck]
show ssl parameter [-ndcppComplianceCertCheck]
set ssl vserver [-preload] [-preload]
show ssl dtlsProfile
add ssl profile [-preload]
set ssl profile [-preload]
show ssl profile [-preload]

Command group: System

Command:

create system backup [-useLocalTimezone] [-includekernel]
show system backup [-useLocalTimezone]
add ns tcpProfile [-taillossprobe]
set ns tcpProfile [-taillossprobe]
show ns tcpProfile [-taillossprobe]
add ns icapProfile [-insertHTTPRequest]
set ns icapProfile [-insertHTTPRequest]
show ns icapProfile [-insertHTTPRequest]
add ns httpProfile [-markTraceReqInval]
set ns httpProfile [-markTraceReqInval]
unset ns httpProfile [-markTraceReqInval]
show ns httpProfile[- markTraceReqInval]
save ns config all
set ns param [-mgmthttpport] [-mgmthttpsport] [-proxyProtocol]
show ns param [-mgmthttpport] [-mgmthttpsport] [-proxyProtocol]
set ns httpParam [-ignoreConnectCodingScheme]
show ns httpParam [-ignoreConnectCodingScheme]
add ns icapProfile [-logAction]
set ns icapProfile [-logAction]
show ns icapProfile [-logAction]

Command group: Subscriber

Command:

set subscriber gxInterface [-healthCheck] [-healthCheckTTL] [-cerRequestTimeout] [-negativeTTLLimitedSuccess] [-purgeSDBonGxFailure] [-gxReportingAvp1] [-gxReportingAvp1VendorId] [-gxReportingAvp1Type] [-gxReportingAvp2] [-gxReportingAvp2VendorId] [-gxReportingAvp2Type] [-gxReportingAvp3] [-gxReportingAvp3VendorId] [-gxReportingAvp3Type] [-gxReportingAvp4] [-gxReportingAvp4VendorId] [-gxReportingAvp4Type] [-gxReportingAvp5] [-gxReportingAvp5VendorId] [-gxReportingAvp5Type]
show subscriber gxInterface [-healthCheck] [-healthCheckTTL] [-cerRequestTimeout] [-negativeTTLLimitedSuccess] [-purgeSDBonGxFailure] [-gxReportingAvp1] [-gxReportingAvp1VendorId] [-gxReportingAvp1Type] [-gxReportingAvp2] [-gxReportingAvp2VendorId] [-gxReportingAvp2Type] [-gxReportingAvp3] [-gxReportingAvp3VendorId] [-gxReportingAvp3Type] [-gxReportingAvp4] [-gxReportingAvp4VendorId] [-gxReportingAvp4Type] [-gxReportingAvp5] [-gxReportingAvp5VendorId] [-gxReportingAvp5Type]

Command group: Traffic Management

Command:

show tm sessionPolicy
show tm sessionAction
show tm global
show tm sessionParameter [-tmsessionpolicyBindtype] [-tmsessionpolicyCount]

Command group: URL Filtering

Command:

set urlfiltering parameter [-CloudHost] [-SeedDBPath]
show urlfiltering parameter [-CloudHost] [-SeedDBPath]

Command group: VPN

Command:

show vpn sessionPolicy
add vpn sessionAction [-fqdnSpoofedIP]
set vpn sessionAction [-fqdnSpoofedIP]
show vpn sessionAction [-feature] [-fqdnSpoofedIP]
show vpn clientlessAccessPolicy
bind vpn global [-userDataEncryptionKey]
unbind vpn global [-userDataEncryptionKey]
show vpn global [-userDataEncryptionKey]
set vpn parameter [-fqdnSpoofedIP] [-netmask]
unset vpn parameter [-fqdnSpoofedIP]
show vpn parameter [-fqdnSpoofedIP]

Deprecated parameters

Command group: AppFlow

Command:

add appflow action [-MetricsLog]
show appflow action [-MetricsLog]

Command group: LSN

Command:

add lsn transportprofile [-stuntimeout]
set lsn transportprofile [-stuntimeout]
show lsn transportprofile [-stuntimeout]

Command group: Network

Command:

clear rnat

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

New and deprecated commands, parameters, and SNMP OIDs

September 14, 2021

Contributed by:

S C

September 14, 2021

Contributed by:

S C

New and deprecated commands, parameters, and SNMP OIDs

New commands

New parameters

Deprecated parameters

In this article