ADC

Add custom entries to a static proximity database

February 17, 2023

Contributed by:

C S

Custom entries take precedence over static entries in the proximity database. You can add a maximum of 3000 custom entries. For a custom entry, denote all omitted qualifiers with an asterisk (*) and, if qualifiers have a period or space in the name, enclose the parameter in double quotation marks. The first 31 characters are evaluated for each qualifier. You can also provide the longitude and latitude of the geographical location of the IP address-range for selecting a service with the static proximity GSLB method.

To add custom entries by using the command line interface

At the command prompt, type the following commands to add a custom entry to the static proximity database and verify the configuration.

add location < IPfrom> < IPto> <preferredLocation> [-longitude <integer>[-latitude <integer>]]
show location
<!--NeedCopy-->

Example:

> add location 192.168.100.1 192.168.100.100 *.us.ca.mycity
Done
<!--NeedCopy-->

> show location
1) IP from 192.168.100.1    IP to 192.168.100.100
Continent.Country.REgion.City.ISP.Organization =
North America.us.ca.mycity.*.
Coordinated: Not specified
Done
<!--NeedCopy-->

Parameters for adding custom entries

From IP Address: First IP address in the range that is in dotted decimal notation.

This is a mandatory argument.
To IP Address: Last IP address in the range that is in dotted decimal notation.

This is a mandatory argument.
Location Name: String of qualifiers that is in dotted notation describes the geographical location of the IP address range. Each qualifier is more specific than the one that precedes it, as in continent.country.region.city.isp.organization. For example,”NA.US.CA.San Jose.ATT.citrix”.

This is a mandatory argument. Maximum Length: 197

Note:

A qualifier that includes a dot (.) or space ( ) must be enclosed in double quotation marks.
longitude: Numerical value that is in degrees specifies the longitude of the geographical location of the IP address-range. Maximum value: 180
latitude: Numerical value that is in degrees specifies the latitude of the geographical location of the IP address-range. Maximum value: 180

Note:

Longitude and latitude parameters are used for selecting a service with the static proximity GSLB method. If they are not specified, selection is based on the qualifiers specified for the location.

To add custom entries by using the configuration utility

Navigate to AppExpert > Location, click the Custom Entries tab, and add the custom entries.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

Add custom entries to a static proximity database

February 17, 2023

Contributed by:

C S

February 17, 2023

Contributed by:

C S

Add custom entries to a static proximity database

To add custom entries by using the command line interface

Parameters for adding custom entries

To add custom entries by using the configuration utility

In this article